On-site Repair Services

On-site Repair Services

Our on-site field services consists of trouble shooting, which is one of the largest services we do in the field. We offer removal and replacement of components associated with hydraulic systems for heavy equipment, tractor trailers, and we also provide minor welding onsite. We also offer minor repairs such as adjusting hydraulic pressures on components, to major repairs such as the removal of large hydraulic drive motors or clutches.


Hydraulic Cylinder Repair & Manufacturing

Hydraulic Cylinder Servicer

  • Provides up to 25,000 ft-lbs of torque to hydraulically remove retainer caps, bolts and piston nuts.
  • Hydraulically keeps the cylinder aligned during disassembly and reassembly to prevent damage to cylinder and packing components.

Hydraulic Cylinder Hone

  • Renews sealing surface to provide positive seal
  • Provides positive alignments.

Schroeder Hydraulic Test Bench

  • Allows all remanufactured or rebuilt pumps, motors, cylinders and valves to be tested to factory specifications before installing them in a working system.
  • Allows remanufactured power shift transmissions to be hydraulically tested assuring positive clutch pack sealing.
  • Allows testing of remanufactured hydrostatic systems.

Lathe Machine –

Lapping Machine –

We offer lapping capabilities to rectify and refurbish thrust and valve plates for pumps and motors. This allows us to improve turnaround time and reduce the overall cost of repairs.

Tubing & Hoses

Our outstanding inventory of high quality hydraulic hoses, fittings, and tubing ensures that we can match your needs and specifications. Our facility has a complete inventory of Gates tubing and hoses. We can duplicate almost any tube or hose worldwide - metric or American. Custom fabrication and production work for automobiles, trucks, buses, farm, industrial, marine, mining, construction, forestry, chemical, manufacturing, instrumentation, and sports vehicles.

Tubes and Hoses Fabrication Center

  • Reduce downtime – tubes and hoses fabricated while you wait, including tube/hose assemblies.
  • Hoses from 1/4” to 1 1/4” including CAT style
  • Tubes from 3/16” to 1 1/4”
  • Pneumatically tested assemblies to assure quality control


Powertrain Supplier & Component Repair/Rebuild

We are your reliable source for repairs or to remanufacture components giving you the widest range of options. Where possible welding and machining steps can recondition a wide range of expensive components at a fraction of the cost of new.

Heavy Equipment Powertrains Process

  • Perform Diagnostics Test (Troubleshooting)
  • Complete disassembly and evaluation of your machine and components
  • Provide accurate repair quotation
  • Re-assembly by trained technicians using specialty tools and standards
  • Conduct performance and quality control tests

Other Categories – Pump Drives, Torque Converters, Hydraulic Reversers, Powershift Transmissions, Hydrostatic Transmissions, Differentials, Planetary Drives, Hydraulic Circuits


Hydraulic Cylinder Repair & Manufacturing

Our capabilities and services would not be complete if we were not able to offer you a comprehensive and fully equipped machine shop and welding facility staffed by knowledgeable and experienced professionals.
We understand when it comes to hydraulic cylinders, all work must be of the highest standards and proper, exacting specifications to withstand the sometimes harsh environments of your business. If necessary, we will manufacture from scratch any individual part or fabricate a complete new cylinder.
All processes are monitored for quality and workmanship. All tolerances are pre-checked before final assembly. The final operational test is performed at the components rated pressure.

Hydraulic Cylinder Servicer

  • Provides up to 25,000 ft-lbs of torque to hydraulically remove retainer caps; bolts and piston nuts.
  • Hydraulically keeps the cylinder aligned during disassembly and reassembly to prevent damage to cylinder and packing components.
  • 20ft x 16 in dia

Hydraulic Cylinder Hone

  • Renews sealing surface to provide positive seal.
  • Hones to .060 oversize to save scored barrels
  • Provides positive alignments
  • 2 ½ "-16" dia

Lathe

  • Allows re-machining of worn pieces of equipment.

Machine Shop Welding

Schroder Hydraulic Test Bench

  • Allows all rebuilt pumps, motors, cylinders, and valves to be tested to factory specifications before installing them in a working system.
  • Allows rebuilt power shift transmissions to be hydraulically tested assuring positive clutch pack sealing.
  • Allows testing of hydrostatic transmission rebuilds.

Capabilities and Services

We provide the highest quality repair available. When we disassemble a cylinder, all tolerances are checked and recorded and a failure analysis is performed. These findings will be incorporated into a detailed quote that we will forward to you with our recommendations. Reconditioned hydraulic cylinders go through a rigorous testing process. Our test stands are specifically designed for this purpose. Whether we are testing cylinders, we ensure that the unit meets or exceeds OEM specifications before it leaves our shop. Sometimes it proves to be more economical to replace a component than to recondition it. We can manufacture any part or fabricate a complete new cylinder right at our facility. Or, we can utilize our cast network of suppliers to provide you with an OEM replacement at a competitive price. In some instances, our thorough cylinder inspection process will reveal abnormalities that prohibit a simple hone and reseal. In those cases, our expert technicians will develop a repair plan to suit your needs. Many times, we can repair a component for a fraction of the cost of new. In addition, we can also repair or manufacture virtually any cylinder component from scratch including rods, pistons, and tubes that will meet or exceed OEM specifications.

Stationary Hydraulic Systems

We specialize in stationary hydraulic systems, like down stroke balers, horizontal balers, compactors, shredders, choppers, hoggers, conveyers, hydraulic loading ramps, security bars and enclosures. Field Tec is fully equipped with trucks so we can get can to you in an efficient manner. We carry out customized maintenance contracts, on-site diagnostics, oil analysis, fluid depollution, checks and repairs, installation, control and system optimization.

Hydraulic Power Units and Control Systems

The hydraulic power units we build generally will start with a specification or requirement by the customer, and the unit is custom designed, engineered and sometimes installed as a turnkey package. They are mostly one of a kinds for a specific project.

We can provide you with turnkey solutions and systems including: integrated PLC and computer controls engineered specifically for your application and environment. Whether you’re building new, or updating older equipment, we’ll start by listening to you, then provide you with a cost effective and reliable hydraulic system.

We service and can install what we sell. From troubleshooting to installation of piping, to system start up, we have the right tools, and more importantly – the right people. With today’s complex pump controls and electronic driven valves, training is vital. Our technicians are factory-trained and continually updated through in-house service seminars.


Hydraulic Pump, Motor, Valve Service & Repair

Today’s complex hydraulic systems incorporate specialized controls for pumps, motors and valves.
Proper setup requires knowledgeable individuals with capable test equipment. Whether it’s a constant volume vane pump, a gear pump or a variable volume, pressure compensated horsepower limiting pump, we can fulfill all your requirements.
Our Goal is to provide you the highest quality repair, quick and accurate turnaround times, and competitive pricing.

Pumps & Motors:

  • Open and closed loop
  • Fixed and variable displacement

Valves:

  • Pressure and directional control
  • Proportional and servo

Rotary Actuators:

  • Vane and rack & pinion

Gear Boxes:

  • Planetary and worm gear
  • Mobile and industrial
  • Helical, bevel and winches

Hydraulic Gear Pump
When repair indicators are present, rebuilding a gear pump is an economical option which fully restores the hydraulic system to optimum performance.

Repair Includes:

  • Reseal, Repair, Replace

Repair Indicators:

  • Oil Leak
  • Pump not producing required output
  • Motor not producing required output torque/speed
  • SOS report indicates high levels of metallic particles in oil
  • Excessive noise, heat or vibration
  • Scheduled Custom Hydraulic Service Inspection

Lapping Machine:

We offer lapping capabilities to rectify and refurbish thrust and valve plates for pumps and motors. This allows us to improve turnaround time and reduce the overall cost of repairs.

Schroder Hydraulic Test Bench:

  • Allows all rebuilt pumps, motors, cylinders, and valves to be tested to factory specifications before installing them in a working system.
  • Allows rebuilt power shift transmissions to be hydraulically tested assuring positive clutch pack sealing.
  • Allows testing of hydrostatic transmission rebuilds.

Hard Chrome Plating

Hard Chrome Plating is used almost exclusively on the surface of hydraulic cylinder rods. Having the ability to remove old chrome, resurface and re-plate your cylinder rods is cost effective and maintains the integrity of the original equipment.